Win 10 Ethernet Unidentified Network
Introduction:
The Ethernet Unidentified Network issue is a common problem faced by Windows 10 users. This issue occurs when the computer fails to establish a network connection through the Ethernet port. In this article, we will explore the causes behind this issue and provide detailed troubleshooting steps to resolve it.
I. Causes:
1. Incorrect IP configuration: An incorrect or misconfigured IP configuration can lead to the Ethernet network being labeled as an unidentified network.
2. Outdated network drivers: If the network drivers are outdated or incompatible with Windows 10, it can result in the Ethernet network being unidentified.
3. Hardware issues: Faulty Ethernet cables, damaged ports, or other hardware malfunctions can prevent the computer from recognizing the network, leading to the unidentified network problem.
II. Troubleshooting Steps:
1. Restart the computer:
Start by restarting your computer as it can help resolve temporary software glitches causing the unidentified network issue.
2. Check the Ethernet cable:
Inspect the Ethernet cable for any signs of damage or loose connections. If any issues are found, replace the cable with a new one.
3. Update network drivers:
a. Press the Windows key + X and select \”Device Manager\”.
b. Expand the \”Network Adapters\” category.
c. Right-click on the Ethernet adapter and select \”Update driver\”.
d. Choose the option to search automatically for updated driver software.
e. Follow the on-screen instructions to install the latest drivers.
4. Reset TCP/IP settings:
a. Press the Windows key + X and select \”Command Prompt (Admin)\”.
b. Type the following commands one by one and press Enter after each command:
– ipconfig /release
– ipconfig /renew
– netsh winsock reset
– netsh int ip reset
c. Restart your computer and check if the Ethernet network is now identified.
5. Disable IPv6:
a. Press the Windows key + X and select \”Network Connections\”.
b. Right-click on the Ethernet connection and choose \”Properties\”.
c. Uncheck the \”Internet Protocol Version 6 (IPv6)\” option.
d. Click \”OK\” and restart the computer to see if the problem is resolved.
6. Disable power management:
a. Press the Windows key + X and select \”Device Manager\”.
b. Expand the \”Network Adapters\” category.
c. Right-click on the Ethernet adapter and select \”Properties\”.
d. Go to the \”Power Management\” tab and uncheck the option \”Allow the computer to turn off this device to save power\”.
e. Click \”OK\” and restart the computer.
Conclusion:
The Ethernet Unidentified Network issue in Windows 10 can be frustrating, but the above troubleshooting steps should help resolve the problem. By following these steps, users can eliminate common causes and restore network connectivity through the Ethernet port. If the issue persists, it may be advisable to seek professional assistance or contact the hardware manufacturer for further support.
