Fiber Optic Power Meter Test Procedure
je. Introduction
UN. Purpose of the Test Procedure
B. Scope of the Test Procedure
C. Matériel nécessaire
II. Preparations
UN. Setup the Testing Environment
B. Calibrate the Fiber Optic Power Meter
C. Inspect the Fiber Optic Cable
D. Connect the Fiber Optic Power Meter
III. Test Procedure
UN. Power Loss Measurement
1. Select the Test Wavelength
2. Set the Fiber Optic Power Meter to Zero
3. Connect the Fiber Optic Power Meter to the Fiber Optic Cable
4. Record the Power Measurement
5. Repeat the Measurement for Multiple Points along the Cable
B. Power Meter Accuracy Verification
1. Obtain a Reference Power Source
2. Set the Fiber Optic Power Meter to the Reference Power Source
3. Record the Power Measurement
4. Compare the Measurement with the Known Power Value of the Reference Source
C. Test Cable Continuity Check
1. Set the Fiber Optic Power Meter to the Appropriate Mode
2. Connect the Fiber Optic Power Meter to Both Ends of the Cable
3. Verify the Continuity of the Cable
4. Record the Measurement for Future Reference
D. Polarization Mode Dispersion (PMD) Test
1. Prepare the Fiber Optic Power Meter for PMD Measurement
2. Connect the Fiber Optic Power Meter to the PMD Source
3. Record the PMD Measurement
4. Compare the Measurement with the Allowable PMD Limit
IV. Troubleshooting
UN. Identify Potential Issues
B. Analyze Measurement Anomalies
C. Perform Necessary Adjustments and Retest
V. Conclusion
UN. Summary of Test Results
B. Recommendations for Further Action
C. Document and Report the Test Findings
Note: This article on the fiber optic power meter test procedure follows a hierarchical structure with multi-level headings. The introduction provides an overview of the purpose, scope, and equipment required for the test. The preparations section covers the setup, calibration, inspection, and connection of equipment. The test procedure section elaborates on the different measurements to be conducted, such as power loss measurement, power meter accuracy verification, test cable continuity check, and PMD test. The troubleshooting section guides the reader on how to identify and resolve any issues. The conclusion summarizes the test results, provides recommendations, and emphasizes the importance of documenting and reporting the findings.
