SFP+ Pinout
介绍:
The Small Form-factor Pluggable Plus (SFP+) is a compact and hot-pluggable transceiver commonly used for high-speed data communication in networking equipment. In this article, we will explore the pinout configuration of the SFP+ connector and understand the purpose of each pin.
Pinout Configuration:
1. TX+ (Transmit Data+): This pin is used for transmitting data signals from the SFP+ module to the receiving device. It carries the positive polarity of the electrical signal.
2. TX- (Transmit Data-): This pin is the complement of the TX+ pin and carries the negative polarity of the transmitted data signal.
3. RX+ (Receive Data+): This pin is used for receiving data signals from the external device. It carries the positive polarity of the received electrical signal.
4. RX- (Receive Data-): This pin is the complement of the RX+ pin and carries the negative polarity of the received data signal.
5. TX Disable: This pin is used to disable the transmitter of the SFP+ module. When a high signal is present on this pin, the transmitter is turned off, ceasing the transmission of data.
6. TX Fault: This pin indicates the fault condition of the transmitter inside the SFP+ module. When a fault occurs, such as a laser bias current fault or a loss of signal, this pin goes high.
7. Ground: This pin is the electrical ground reference for the SFP+ module and provides a common ground for various signals and circuits.
8. RX Los (Receive Loss of Signal): This pin indicates the loss of the received optical signal. When an optical signal is not detected, this pin goes high.
9. RX Power: This pin provides the power supply to the receiver circuitry inside the SFP+ module.
10. Vee R: This pin is the power supply for the receiver circuitry. It provides the necessary voltage for the receiver to operate.
11. Vee T: This pin is the power supply for the transmitter circuitry. It provides the necessary voltage for the transmitter to operate.
12. RX/TX Rate Select: This pin is used to select the data rate of the SFP+ module. By connecting this pin to either Vee R, Vee T or ground, different data rates can be configured.
结论:
Understanding the pinout configuration of the SFP+ connector is crucial for proper installation and operation of networking equipment. Each pin serves a specific purpose and plays a vital role in the transmission and reception of data signals. By familiarizing ourselves with the pinout, we can ensure effective communication and optimize the performance of our network.
