| Part Number | DWDM-200CFP2-DCO | Vendor Name | FS |
| Form Factor | CFP2 | Max Data Rate | 100/200Gbps |
| Grid Spacing | 50GHz | Frequency Range | 191.3~196.05THz |
| Optical channels | 96 | Tunable Wavelength | Tunable ITU CH13-CH60 |
| Transmission Protocols | PM-QPSK (100G) PM-16QAM (200G) | Max Cable Distance | 1000km (100G) w/ EDFA 800km (200G) w/ EDFA |
| Connector | Duplex LC | Media | SMF |
| Tx output power | -6.5~-2.5dBm | Input Power Range | -18~0dBm |
| Line Modulation | PM-QPSK (100G) PM-16QAM (200G) | Power Consumption | <24W |
| Host FEC | Supported | Operating Temperature | 0 to 70°C (32 to 158°F) |
| Protocols | Electrical interfaces OTL4.4, OTLC1.4, CAU-I4, OTLC2.8 and CEI-28G-MR CFP2 MSA Hardware Specification 1.0 with modifications compliant CFP MSA Management Interface Specification 2.2 with modifications compliant IEEE 802.3 clause 45 | Warranty | 5 Years |
Generic Compatible 100G/200G Coherent CFP2-DCO Transceiver Module (DWDM, 50GHz, 80km, LC)
$8,999.00
Generic Compatible 100G/200G DWDM Tunable ITU CH13-CH60 CFP2 DCO 50GHz 80km DOM Duplex LC SMF Transceiver Module
CFP2-DCO Coherent transceivers support flex-grid DWDM tuning and provide 200GBase-DCO throughput up to 80km over single-mode fiber (SMF) using a wavelength of 1529.16 to 1567.13nm via an LC connector. Digital optical monitoring (DOM) support is also present to allow access to real-time operating parameters.
It is designed for line-side trunk DWDM data center interconnect (DCI) and OTU4/OTUC1/OTUC2 metro optical transport network
Reviews
There are no reviews yet.