| Part Number | QDD-4Q56AO03 | Vendor Name | FS |
| Form Factor | QSFP-DD to QSFP56 | Max Data Rate | 400Gbps |
| Cable Length | 3m (10ft) | Cable Type | OM3 |
| Wavelength | 850nm | Minimum Bend Radius | 30mm |
| Transmitter Type | VSCEL | Receiver Type | PIN |
| Power Consumption | 400G <10W 100G<3W | Jacket Material | LSZH |
| CDR (Clock and Data Recovery) | TX & RX Built-in CDR | Modulation Format | 4x 100G-PAM4 |
| DDM/DOM | Supported | Commercial Temperature Range | 0 to 70°C (32 to 158°F) |
| Protocols | IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, QSFP-DD-CMIS-Rev4.0, SFF-8024, IEEE 802.3bs Annex120E | Host FEC | Pre-FEC BER 2.4E-4 |
| Application | 400G Ethernet | Warranty | 5 Years |
3m (10ft) Cisco Compatible 400G QSFP-DD to 4x100G QSFP56 Active Optical Breakout Cable
$1,485.00
Cisco Compatible 400G QSFP-DD AOC (3-meter,QSFP-DD to 4x QSFP56)
The 400G QSFP-DD to 4 QSFP56 Active Optical Breakout Cables are designed for use in 400 Gigabit Ethernet links over OM3 multimode fibers, each operating at data rates of up to 53.125Gbps per channel by PAM4 modulation. This breakout cable is compliant with IEEE 802.3cd, OIF-CEI, QSFP-DD MSA, QSFP-DD-CMIS, IEEE 802.3bs Annex120E SFF-8024, SFF-8679, SFF-8665 standards.
Reviews
There are no reviews yet.