| Part Number | QDD800-PLR8-B1 | Vendor Name | FS |
| Form Factor | QSFP-DD | Max Data Rate | 850Gbps (8x 106.25Gbps) |
| Wavelength | 1311nm | Max Cable Distance | 10km |
| Connector | MTP/MPO-16 | Media | SMF |
| Transmitter Type | EML | Receiver Type | SiPhotonics PIN PD |
| TX Power | -1.9~4.8dBm | Receiver Sensitivity | ＜-8.2dBm |
| Powerbudget | 6.3dB | Receiver Overload | 4.8dBm |
| Typical Power Consumption | 18W | Extinction Ratio | >3.5dB |
| Packaging Technology | COB (Chip on Board) Packaging | Modulation Format | PAM4 |
| CDR (Clock and Data Recovery) | TX and RX Built-in CDR | FEC Function | Support RS-FEC |
| Protocols | CMIS Rev 5.0, QSFP-DD MSA HW Rev 6.01, IEEE 802.3cu-2021 | Warranty | 5 Years |
800GBASE-PLR8 QSFP-DD Optical Transceiver Module (SMF, 1310nm, 10km, MTP/MPO-16, DOM)
$6,799.00
Generic Compatible 800GBASE-PLR8 QSFP-DD PAM4 1310nm 10km DOM MTP/MPO-16 SMF Optical Transceiver Module
The Generic Compatible QSFP-DD transceiver supports up to 10km link lengths over single-mode fiber (SMF) with MTP/MPO-16 connectors. This transceiver is compliant with QSFP-DD MSA HW Rev 6.01, IEEE 802.3cu-2021 and CMIS Rev 5.0 standards. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters. It is suitable for 800G Ethernet, Data Center, Breakout 2x 400G PLR4 or 8x 100G LR application.
You must be logged in to post a review.
Reviews
There are no reviews yet.